Cartridges & Mechanical Seals

56 SECTORS: SECTORS: CHARACTERISTICS: • Working pressure: 64 bar. • Temperature: up to 125 ºC . • Materials: Stainless steel DESCRIPTION: Working fluids often contain sand particles, incrusted re- sidue from boilers and pipes etc. which can damage the mechanical seal and reduce its durability. Situations of this type can be avoided by installing a cyclone. This type of element is installed outside the pump, be- tween the discharge zone and the mechanical seal chamber. A current or vortex of pressurised fluid is gene- rated inside it and the effect of the centrifugal force se- parates the particles suspended in the fluid. The particles that are heavier than the fluid are thrown towards the walls and dragged to the lower part of the LC, while the clean fluid emerges from the top and is returned to the chamber where the mechanical seal is located. API31 and API41 configuration. These elements require no maintenance and do not be- come blocked over time. CLEAN FLUID SEALED CHAMBER PARTICLES PUMP DISCHARGE ZONE CHARACTERISTICS: • Temperature: -30ºC to +110 ºC. • Working pressure: 30 bar. • Volume (L) : 2 l. • Flow rate : 15 ml / run-out • Materials: Stainless steel / polyethylene. DESCRIPTION: LHP with a built-in tank for placing on the reservoir. Ins- talled directly in the LTS reservoir. LCY LHP