LDC80G

Double balanced cartridge for reactors. Lubricated by gas injection (usually N2). The injection is made at a pressure of 1.5 – 2 bar above the process pressure.

The gas flow rate should be controlled by a gas panel, the gas flow rate may vary depending on the seal size and application characteristics.

Flange dimensions DIN 28141, shaft ends according to DIN 28154 and for steel tanks DIN 28136. Floating bearing included.

All LDC80 models are for stepped shafts according to DIN 28154. For shafts without step use reference LDC81G.